Your cart
There are no more items in your cart
Features
- Universal sensors for the standardized 6 mm nut
- Mounting from above in the nut (“drop-in” mounting)
- Wide range of versions with different line lengths and connections
- Combined mounting screw with hexagon socket and slotted screw
- ATEX versions available
- High and low temperature versions available
Specifications
- Direct mounting for series
- CCI, GPC, SSI, PRA, PRE, CVI, KPZ
- Indirect mounting for series
- CCL-IS, MNI, KHZ, CSL-RD, ICS-D2, ITS, TRR, RPC, TRB, ICM
- Slot width
- 6 mm T-slot
- Cable
- with cable
- Type of contact
- electronic PNP
- Nominal current, actuated state
- < 30 mA
- Quiescent current (without load)
- < 8 mA
- Hysteresis
- ≥ 0,2 mT
- Certificates
- UL (Underwriters Laboratories), RoHS, CE declaration of conformity, cULus
- Protection class
- IP67, IP65, IP69K
- Min. ambient temperature
- -30 °C
- Max. ambient temperature
- 80 °C
- Voltage drop U at Imax
- ≤ 2,5 V
- DC switching current, max.
- 0.13 A
- Max. switching frequency
- 1000 Hz
- Switching point precision
- ±0,1 mT
- Switching logic
- NO (make contact)
- LED status display
- Yellow
- Electrical connection
- open cable ends
- Number of poles
- 3-pin
- Operating voltage DC, min.
- 10 V DC
- Operating voltage DC, max.
- 30 V DC
- Short circuit resistance
- Protected against polarity reversal, short circuit resistant
- Shock resistance
- 30 g / 11 ms
- Vibration resistance
- 10 - 55 Hz, 1 mm