Your cart
There are no more items in your cart
KC characters | KC EMC |
Nominal width of Laval nozzle | 1.4 mm |
Width dimension | 20 mm |
Type code | OVEM |
Muffler construction type | Open |
Mounting position | Any |
Ejector characteristics | High vacuum Standard |
Grade of filtration | 40 µm |
Manual override | Non-detenting Additionally via operating buttons |
Integrated function | Ejector pulse valve, electric Flow control Shut off valve, electric Compressed air filter Air saving function, electrical Non-return valve Pneumatic muffler open Vacuum switch |
Design | Modular |
Short-circuit protection | yes |
Measured variable | Relative pressure |
Measuring principle | Piezoresistive |
Switching element function | N/C contact N/O contact |
Switching function | Window comparator Threshold value comparator |
Symbol | 00992094 |
Valve function | Closed |
Reverse polarity protection | for all electrical connections |
Switching input to standard | IEC 61131-2 |
Display type | 4-character alphanumeric Back-lit LCD |
Display range | -0.999 bar ... 0 bar |
Displayable unit(s) | bar |
Setting range threshold value | -0.999 bar ... 0 bar |
Setting range hysteresis | -0.9 bar ... 0 bar |
Setting options | IO-Link® Via display and pushbuttons |
Switching position indication | LCD |
Switching status indication | Optical |
Operating pressure | 2 bar ... 8 bar |
Operating pressure for max. vacuum | 3.6 bar |
Max. vacuum | 93 % |
Nominal operating pressure | 6 bar |
Max. suction rate with respect to atmosphere | 50.5 l/min |
Air supply time at nominal operating pressure | 0.2 s |
DC operating voltage range | 20.4 V ... 27.6 V |
Duty cycle | 100% |
Insulation voltage | 50 V |
Max. output current | 100 mA |
Residual current | 0.1 mA |
Switching output | 2xPNP |
Voltage drop | ≤ 1.8 V |
Coil characteristics | 24 V DC: low-current phase 0.3 W, high-current phase 2.55 W |
Surge resistance | 0.8 kV |
Overload protection | Available |
Contamination level | 3 |
Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
Information on operating and pilot media | Operation with oil lubrication not possible |
CE marking (see declaration of conformity) | As per EU EMC directive |
Corrosion resistance class (CRC) | 2 - Moderate corrosion stress |
Temperature of medium | 0 °C ... 50 °C |
Relative air humidity | 5 - 85 % |
Noise level at nominal operating pressure | 77 dB(A) |
Degree of protection | IP65 |
Protection class | III |
Ambient temperature | 0 °C ... 50 °C |
Certification | RCM compliance mark c UL us - Listed (OL) |
Max. tightening torque | 0.8 Nm with internal thread 2.5 Nm with through-hole |
Product weight | 380 g |
Pressure measuring range | -1 bar ... 0 bar |
Accuracy in ± % FS | 3 %FS |
Reproducibility, switching value FS | 0.6 % |
Protocol | IO-Link® |
IO-Link®, protocol version | Device V 1.1 |
IO-Link®, profile | Smart sensor profile |
IO-Link®, function classes | Binary data channel (BDC) Process data variable (PDV) Identification Diagnostics Teach channel |
IO-Link®, communication mode | COM2 (38,4 kBd) |
IO-Link®, port class | A |
IO-Link®, process data width OUT | 1 Byte |
IO-Link®, process data content OUT | 1 bit (ejector pulse ON/OFF) 1 bit (vacuum ON/OFF) |
IO-Link®, process data width IN | 2 Byte |
IO-Link®, process data content IN | 14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring) |
IO-Link®, minimum cycle time | 3.5 ms |
IO-Link®, data memory required | 500 byte |
IO-Link®, device ID | 0x00003E |
Electrical connection | 5-pin M12x1 Plug |
Protection against tampering | Electronic interlock |
Type of mounting | With through-hole With internal thread With accessories |
Pneumatic connection 1 | QS-8 |
Pneumatic connection 3 | QS-8 |
Vacuum connection | QS-8 |
Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
Seals material | NBR |
Female nozzle material | POM |
Compressed air filter material | Fabric PA Sintered steel |
Housing material | Die-cast aluminum PA-reinforced |
Material of adjusting screw | Steel |
Muffler material | Wrought aluminum alloy PU foam |
Material of screws | Steel |
Inspection window material | PA |
Material of plug housing | Brass, nickel-plated |
Material of pin contacts | Brass, gold-plated |
Material of pins | Steel |
Material of jet nozzle | Wrought aluminum alloy |
Material of keypad | TPE-U |
Material of pneumatic fitting | Brass, nickel-plated |