Your cart
There are no more items in your cart
| Explosive ambient temperature | -10°C <= Ta <= +60°C |
| Type of ignition protection for gas | Ex h IIC T4 Gb |
| ATEX category gas | II 2G |
| Drive pinion effective diameter | 28.65 mm |
| Working stroke | 50 mm ... 8500 mm |
| Size | 80 |
| Toothed belt elongation | 0.24 % |
| Toothed belt pitch | 3 mm |
| Type code | EGC |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | Electromechanical linear axis with toothed belt |
| Motor type | Stepper motor Servo motor |
| Max. acceleration | 50 m/s² |
| Max. speed | 5 m/s |
| Repetition accuracy | ±0.08 mm |
| Duty cycle | 100% |
| Explosion prevention and protection | Zone 1 (ATEX) Zone 2 (ATEX) |
| CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX) |
| Degree of protection | IP40 |
| Ambient temperature | -10 °C ... 60 °C |
| 2nd moment of area Ix | 844000 mm⁴ |
| 2nd moment of area Iy | 1160000 mm⁴ |
| Max. force Fy | 3050 N |
| Max. force Fz | 3050 N |
| Max. no-load resistance to shifting | 28 N |
| Max. torque Mx | 36 Nm |
| Max. feed force Fx | 350 N |
| Torsion moment of inertia It | 551000 mm⁴ |
| Mass moment of inertia JH per meter of stroke | 0.19 kgcm² |
| Mass moment of inertia JL per kg of payload | 2.05 kgcm² |
| Feed constant | 90 mm/U |
| Pneumatic port on clamping unit | M5 |
| Material of end caps | Wrought aluminum alloy, anodized |
| Profile material | Wrought aluminum alloy, anodized |
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
| Drive cover material | Wrought aluminum alloy, anodized |
| Slide carriage material | Steel |
| Guide rail material | Steel |
| Belt pulley material | High-alloy stainless steel |
| Slide material | Wrought aluminum alloy, anodized |
| Toothed belt clamping component material | Cast stainless steel |
| Toothed belt material | Polychloroprene with glass cord and nylon coating Polyurethane with steel cord and nylon cover |
