Your cart
There are no more items in your cart
| Explosive ambient temperature | -10°C <= Ta <= +60°C |
| Type of ignition protection for gas | Ex h IIC T4 Gb |
| ATEX category gas | II 2G |
| Drive pinion effective diameter | 24.83 mm |
| Working stroke | 50 mm ... 5000 mm |
| Size | 70 |
| Toothed belt elongation | 0.08 % |
| Toothed belt pitch | 3 mm |
| Type code | EGC |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | Electromechanical linear axis with toothed belt |
| Motor type | Stepper motor Servo motor |
| Max. acceleration | 50 m/s² |
| Max. speed | 5 m/s |
| Repetition accuracy | ±0.08 mm |
| Duty cycle | 100% |
| Explosion prevention and protection | Zone 1 (ATEX) Zone 2 (ATEX) |
| CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX) |
| Degree of protection | IP40 |
| Ambient temperature | -10 °C ... 60 °C |
| 2nd moment of area Ix | 395000 mm⁴ |
| 2nd moment of area Iy | 577000 mm⁴ |
| Max. force Fy | 1850 N |
| Max. force Fz | 1850 N |
| Max. no-load resistance to shifting | 14.5 N |
| Max. torque Mx | 16 Nm |
| Max. feed force Fx | 100 N |
| Torsion moment of inertia It | 240000 mm⁴ |
| Mass moment of inertia JH per meter of stroke | 0.11 kgcm² |
| Mass moment of inertia JL per kg of payload | 1.54 kgcm² |
| Feed constant | 78 mm/U |
| Material of end caps | Wrought aluminum alloy, anodized |
| Profile material | Wrought aluminum alloy, anodized |
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
| Drive cover material | Wrought aluminum alloy, anodized |
| Slide carriage material | Steel |
| Guide rail material | Steel |
| Belt pulley material | High-alloy stainless steel |
| Slide material | Wrought aluminum alloy, anodized |
| Toothed belt clamping component material | Nickel-plated |
| Toothed belt material | Polychloroprene with glass cord and nylon coating Polyurethane with steel cord and nylon cover |
