Your cart
There are no more items in your cart
| Working stroke | 50 mm ... 2000 mm |
| Size | 80 |
| Screw diameter | 15 mm |
| Type code | EGC |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | Electromechanical linear axis with ball screw |
| Motor type | Stepper motor Servo motor |
| Spindle type | Ball screw |
| Max. acceleration | 15 m/s² |
| Max. speed | 0.5 m/s ... 1 m/s |
| Repetition accuracy | ±0.02 mm |
| Duty cycle | 100% |
| Degree of protection | IP40 |
| Ambient temperature | -10 °C ... 60 °C |
| 2nd moment of area Ix | 981000 mm⁴ |
| 2nd moment of area Iy | 1320000 mm⁴ |
| 2nd moment of area Iz | 981000 mm⁴ |
| Max. force Fy | 3050 N |
| Max. force Fz | 3050 N |
| Max. torque Mx | 36 Nm |
| Max. radial force on actuator shaft | 250 N |
| Max. feed force Fx | 650 N |
| Torsion moment of inertia It | 255000 mm⁴ |
| Mass moment of inertia JH per meter of stroke | 0.346 kgcm² |
| Feed constant | 10 mm/U ... 20 mm/U |
| Pneumatic port on clamping unit | M5 |
| Material of end caps | Wrought aluminum alloy Anodized |
| Moment compensator material | Wrought aluminum alloy Anodized |
| Profile material | Wrought aluminum alloy Anodized |
| Note on materials | RoHS-compliant |
| Drive cover material | Wrought aluminum alloy Anodized |
| Slide carriage material | Steel |
| Guide rail material | Steel |
| Slide material | Wrought aluminum alloy Anodized |
| Spindle nut material | Steel |
| Spindle material | Steel |
