Your cart
There are no more items in your cart
| Size | 9 |
| Type code | MSB9 |
| Series | MS |
| Actuation type | Electrical Manual Pneumatic |
| Actuator lock | Rotary knob with integrated lock |
| Mounting position | Any Vertical +/- 5° |
| Grade of filtration | 0.01 µm ... 40 µm |
| Condensate drain | Fully automatic Manually rotating Semi-automatic |
| Design | Branching module Active carbon filter Pressure regulator with pressure gauge Soft start/quick exhaust valve Shut off valve Fiber filter Filter regulator with pressure gauge Filter regulator without pressure gauge Proportional standard oil mist lubricator Sinter filter with centrifugal separator |
| Max. condensate volume | 220 ml |
| Max. oil capacity | 490 cm³ |
| Controller function | Outlet pressure constant With primary pressure compensation With secondary exhausting With return flow function |
| Bowl guard | Integrated as metal bowl guard |
| Differential pressure display | Visual display With pressure sensor |
| Pressure gauge | with pressure sensor with pressure gauge |
| Operating pressure | 0 bar ... 20 bar |
| Pressure regulation range | 1 bar ... 16 bar |
| Standard nominal flow rate | 1400 l/min ... 18000 l/min |
| Coil characteristics | 110 V AC: 50/60 Hz, initial power 11.5 VA, holding power 8.9 VA 230 V AC: 50/60 Hz, initial power 11.5 VA, holding power 9.1 VA 24 V DC: 4.5 W 24 V DC: 8.4 W |
| ATEX category gas | II 2G II 3G |
| Type of ignition protection for gas | Ex h IIC T6 Gb X |
| ATEX category for dust | II 2D II 3D |
| Type of (ignition) protection for dust | Ex h IIIC T60°C Db X |
| Explosion prevention and protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX) |
| Corrosion resistance class (CRC) | 2 - Moderate corrosion stress |
| Storage temperature | -10 °C ... 60 °C |
| Temperature of medium | -10 °C ... 60 °C |
| Ambient temperature | -10 °C ... 60 °C |
| Certification | c UL us - Recognized (OL) |
| Type of mounting | With accessories |
| Pneumatic connection 1 | G1/2 G3/4 G1 G1 1/4 G1 1/2 1/2 NPT 3/4 NPT 1 NPT 1 1/4 NPT 1 1/2 NPT |
| Pneumatic connection 2 | 1 1/2 NPT 1 1/4 NPT 1 NPT 1/2 NPT 3/4 NPT G1 G1 1/2 G1 1/4 G1/2 G3/4 |
| Pneumatic connection 3 | G1 1 NPT |
| Seals material | NBR |
| Housing material | Die-cast aluminum |
| Material of bowl | Wrought aluminum alloy |
