Your cart
There are no more items in your cart
Stroke | 1 mm ... 500 mm |
Piston diameter | 50 mm |
Type code | CRDSNU |
Based on norm | ISO 15552 |
Cushioning | Elastic cushioning rings/pads at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends |
Mounting position | Any |
Design | Piston Piston rod Cylinder barrel |
Position sensing | For proximity sensor |
Variants | Hard scraper For unlubricated operation Explosion protection certification (ATEX) Increased chemical resistance Extended external thread piston rod Internal thread on piston rod Special thread on piston rod Extended piston rod Bearing cover without mounting thread Transverse supply port Through piston rod Heat-resistant seals max. 120°C Temperature range -40 to 80 °C Piston rod at one end |
Operating pressure | 1 bar ... 10 bar |
Mode of operation | Double-acting |
ATEX category gas | II 2G |
Type of ignition protection for gas | Ex h IIC T4 Gb |
ATEX category for dust | II 2D |
Type of (ignition) protection for dust | Ex h IIIC T120°C Db |
Explosive ambient temperature | -20°C <= Ta <= +60°C |
Explosion prevention and protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) |
Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX) |
Corrosion resistance class (CRC) | 3 - High corrosion stress |
For use in the food industry | See supplementary material information |
Ambient temperature | -40 °C ... 120 °C |
Theoretical force at 6 bar, retracting | 990 N |
Theoretical force at 6 bar, advancing | 1178 N |
Type of mounting | With accessories |
Pneumatic connection | G1/4 |
Note on materials | RoHS-compliant |
Cover material | High-alloy stainless steel |
Piston rod material | High-alloy stainless steel |
Material of cylinder barrel | High-alloy stainless steel |