Your cart
There are no more items in your cart
| Pneumatic tubing test conditions | Suitability for energy chains: >5 million cycles as per FN 942021 |
| Tubing characteristics | Suitable for energy chains in applications with high cycle rates |
| Outside diameter | 10 mm |
| Bending radius relevant for flow rate | 40 mm |
| Inside diameter | 7 mm |
| Min. bending radius | 23.5 mm |
| Type code | PEN |
| Temperature-dependent operating pressure | -0.95 bar ... 10 bar |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:-:-] Water as per manufacturer's declaration at www.festo.com |
| Ambient temperature | -30 °C ... 60 °C |
| Certification | German Technical Control Board (TÜV) |
| Product weight by length | 0.03766 kg/m |
| Pneumatic connection | For plug connection outside diameter 10 mm |
| Color | Red |
| Shore hardness | D 52 +/-3 |
| Note on materials | Free of copper and PTFE RoHS-compliant |
| Material of pneumatic tubing | PE |
