Your cart
There are no more items in your cart
| Stroke | 1 mm ... 400 mm |
| Piston diameter | 32 mm |
| Type code | ADN |
| Based on norm | ISO 21287 |
| Cushioning | Elastic cushioning rings/pads at both ends Self-adjusting pneumatic end-position cushioning |
| Mounting position | Any |
| Design | Piston Piston rod Profile barrel |
| Position sensing | For proximity sensor |
| Variants | Explosion protection certification (ATEX) Increased service life Extended external thread piston rod Special thread on piston rod Extended piston rod With anti-twist protection High corrosion protection Dust protection Constant, slow movement Low friction Through piston rod Continuous, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Temperature range -40 to 80 °C Piston rod at one end Recommended for production facilities for the manufacture of lithium-ion batteries |
| Operating pressure | 0.6 bar ... 10 bar |
| Mode of operation | Double-acting |
| ATEX category gas | II 2G |
| Type of ignition protection for gas | Ex h IIC T4 Gb |
| ATEX category for dust | II 2D |
| Type of (ignition) protection for dust | Ex h IIIC T120°C Db |
| Explosive ambient temperature | -20°C <= Ta <= +60°C |
| Explosion prevention and protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX) |
| Corrosion resistance class (CRC) | 0 - No corrosion stress 2 - Moderate corrosion stress 3 - High corrosion stress |
| Ambient temperature | -40 °C ... 120 °C |
| Theoretical force at 6 bar, retracting | 415 N |
| Theoretical force at 6 bar, advancing | 415 N ... 483 N |
| Moving mass at 0 mm stroke | 60 g |
| Additional weight per 10 mm stroke | 30 g |
| Basic weight with 0 mm stroke | 265 g |
| Additional moving mass per 10 mm stroke | 9 g |
| Type of mounting | With through-hole With internal thread With accessories Optionally: |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS-compliant |
| Cover material | Aluminum Anodized |
| Piston rod material | High-alloy steel |
| Material of cylinder barrel | Wrought aluminum alloy Smooth anodized |
