Your cart
There are no more items in your cart
| Stroke | 1 mm ... 500 mm |
| Piston diameter | 50 mm |
| Type code | DSNU |
| Cushioning | Elastic cushioning rings/pads at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends |
| Mounting position | Any |
| Design | Piston Piston rod Cylinder barrel |
| Position sensing | For proximity sensor |
| Variants | Extended external thread piston rod Internal thread on piston rod Special thread on piston rod Piston rod with external thread shortened at one end Extended piston rod Clamping unit on the piston rod Axial supply port With direct mounting Transverse supply port Metal scraper With anti-twist protection High corrosion protection Dust protection Constant, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Piston rod at one end |
| Protection against torsion/guide | Square piston rod |
| Operating pressure | 1 bar ... 10 bar |
| Mode of operation | Double-acting |
| ATEX category gas | II 2G |
| Type of ignition protection for gas | Ex h IIC T4 Gb |
| ATEX category for dust | II 2D |
| Type of (ignition) protection for dust | Ex h IIIC T120°C Db |
| Explosive ambient temperature | -20°C <= Ta <= +60°C |
| Explosion prevention and protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX) |
| Corrosion resistance class (CRC) | 2 - Moderate corrosion stress 3 - High corrosion stress |
| Ambient temperature | -20 °C ... 120 °C |
| Cushioning length | 20 mm |
| Theoretical force at 6 bar, retracting | 990 N |
| Theoretical force at 6 bar, advancing | 1178 N |
| Moving mass at 0 mm stroke | 413 g |
| Additional weight per 10 mm stroke | 40 g |
| Basic weight with 0 mm stroke | 1087 g |
| Additional moving mass per 10 mm stroke | 25 g |
| Type of mounting | With accessories |
| Pneumatic connection | G1/4 |
| Note on materials | RoHS-compliant |
| Cover material | Wrought aluminum alloy |
| Seals material | NBR TPE-U(PU) |
| Piston rod material | High-alloy stainless steel |
| Material of cylinder barrel | High-alloy stainless steel |
