Your cart
There are no more items in your cart
| Bending radius, fixed cable installation | ≥ 60 mm |
| Size | 16 |
| Stroke | 50 mm ... 200 mm |
| Stroke reserve | 0 mm |
| Reversing backlash | 100 µm |
| Step angle with full step | 1.8 deg |
| Step angle tolerance | ±5% |
| Max. angle of rotation of the piston rod +/- | 2 deg |
| Type code | EPCO |
| Mounting position | Any |
| Motor type | Stepper motor |
| Design | with ball screw drive Electric actuator |
| Spindle type | Ball screw drive |
| Max. acceleration | 10 m/s² |
| Repetition accuracy | ±0.02 mm |
| Duty cycle | 100% |
| Insulation protection class | B |
| Nominal operating voltage DC | 24 V |
| Motor nominal current | 1.4 A |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| Storage temperature | -20 °C ... 60 °C |
| Relative air humidity | 0 - 85 % Non-condensing |
| Degree of protection | IP40 |
| Ambient temperature | 0 °C ... 50 °C |
| Certification | RCM compliance mark c UL us - Recognized (OL) |
| Impact energy in the end positions | 1.0E-4 J |
| Electrical connection technology | Plug |
| Type of mounting | With internal thread With accessories |
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
| Cover material | Wrought aluminum alloy Smooth anodized |
| Housing material | Wrought aluminum alloy Smooth anodized |
| Piston rod material | High-alloy stainless steel |
| Spindle nut material | Steel |
| Spindle material | Roller bearing steel |
| Material of cylinder barrel | Wrought aluminum alloy Smooth anodized |
